PLUS is characterized by the reinforced lamella that allows it to reach in a single span up to 4500 mm of maximum module size (maximum span up to 9000 mm without intermediate posts). It is adaptable to any existing or new architecture.
The PLUS EGO series is used for custom and/or sloping work and allows full customization of the pergola.
REINFORCED LAMELLA THICKNESS 38 mm
MAXIMUM WIDTH OF MODULE 4500 mm
MAXIMUM PROJECTION 6165 mm
WINCH COMMAND UNTIL 9 m2
DRILL H 260 mm
UPRIGHT MOUNTS 115/115 mm
MONOBLOC PROFILE SECTION 50X260 mm
SEPARATE GUTTER ON COUPLED MODULES
RAL OF SERIES
REALIZABLE ON A SLOPE
REINFORCED LAMELLA THICKNESS 38 mm
MAXIMUM WIDTH OF MODULE 4500 mm
MAXIMUM PROJECTION 6165 mm
WINCH COMMAND UNTIL 9 m2
VARIABLE CHIP
UPRIGHT MOUNTS 115/115 mm
MONOBLOC PROFILE SECTION 50X260 mm
GRONDA CONTINUA SI MODULI ACCOPPATI
RAL OF SERIES
The leaning pergolas need a suitable fixing wall that is part of the support system; they allow to cover large surfaces without the need of intermediate posts and to live the outdoor environments, such as terraces or balconies, with the utmost versatility.
This pergolas support themselves without the need for a wall structure. The motorized louvers with remote control allow to adjust the brightness, ventilation and to resist the rain by eliminating the water through the gutters integrated in the posts.
The rotated systems are structures leaning against the wall with the louvers arranged transversely to the front of the building so as to enjoy the brightness or to protect themselves from the sun or from the rain.
Individual configurations can be coupled to create multiple modules that increase the surface coverage and shadow of outdoor spaces by offering specific and practical solutions.
The PLUS EGO pergolas can be installed on a slope without compromising the technical performance of water and wind resistance. Taking into account that the slope decreases the water holding capacity as the slope increases, we consider the maximum slope supported by the system is around 40°. The pergolas of the ROTATED and SELF-SUPPORTING modules of any series cannot be realized in the “Sloping” configuration.
The pergolas of the ROTATED and SELF-SUPPORTING modules of any series cannot be realized in the “Sloping” configuration.